Product ID:CLEAN AIR 1-111
MSDS Date:10/24/1993
FSC:8040
NIIN:00N045342
MSDS Number: BTXCV

Emergency Phone: 706-625-0025;800-424-9300(CHEMTREC)

Info Phone: 706-625-0025

Cage: XLCRP

Telephone: 706-625-0025

Cage: XLCRP

NON HAZARDOUS INGREDIENT

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: NO ACUTE EFFECTS EXPECTED.
SKIN: NONE KNOWN. EYE: CONTACT WITH EYE MAY CAUSE IRRITATION.
TARGET ORGANS: NONE KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE: FLUSH EYES WITH AMPLE WATER FOR AT LEAST 15 MIN. SKIN:
WASH SKIN WITH SOAP AND WATER. INGEST: FOR SMALL AMOUNTS RINSE
MOUTH WITH WATER UNTIL TASTE IS GONE. FOR LARGE AMOUNTS, DO NOT
INDUCE VOMITI NG AND CONTACT PHYSICIAN. INHAL: REMOVETO FRESH AIR.
SUPPORT BREATHING (GIVE O2/ARTF RESP).

Extinguishing Media:WATER MIST, DRY CHEMICAL, CARBON DIOXIDE, FOAM.
Fire Fighting Procedures:IF DRIED ADHESIVE IGNITES, USE DRY CHEM FOAM
EXTING/FOG NOZZ. FOR SML FIRES, CO2 EXTING CAN BE USED. USE
NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
Unusual Fire/Explosion Hazard:LIQUID ADHESIVE WILL NOT IGNITE. DRIED
ADHESIVE WILL IGNITE IF HEATED OVER 400F AND OR EXPOSED TO IGNIT
SOURCE.

Spill Release Procedures:SCOOP UP EXCESS WITH SHOVEL WASH REMAINDER
WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN COOL DRY PLACE. OPTIMUM
TEMPERATURE 70F.
Other Precautions:KEEP FROM FREEZING. KEEP SEALED WHEN NOT IN USE.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:NO SPECIAL REQUIREMENTS. DOES NOT RELEASE HAZARDOUS VAPORS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Boiling Pt:B.P. Text:212F,100C
Vapor Density:HVR/AIR
Spec Gravity:1.05-1.22
Evaporation Rate & Reference:AS WATER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:40-60

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR OXIDANTS.
Stability Condition to Avoid:TEMPERATURES BELOW 35F.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:LANDFILL OR INCINERATE AS PER LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.